Print RD-5R channels.
This commit is contained in:
parent
171596c5fe
commit
cebb3c3058
490
rd5r.c
490
rd5r.c
@ -78,109 +78,93 @@ typedef struct {
|
||||
// Bytes 0-15
|
||||
uint8_t name[16]; // Channel Name
|
||||
|
||||
// Byte 0
|
||||
uint8_t channel_mode : 2, // Mode: Analog or Digital
|
||||
#define MODE_ANALOG 1
|
||||
#define MODE_DIGITAL 2
|
||||
|
||||
bandwidth : 2, // Bandwidth: 12.5 or 20 or 25 kHz
|
||||
#define BW_12_5_KHZ 0
|
||||
#define BW_20_KHZ 1
|
||||
#define BW_25_KHZ 2
|
||||
|
||||
autoscan : 1, // Autoscan Enable
|
||||
squelch : 1, // Squelch
|
||||
#define SQ_TIGHT 0
|
||||
#define SQ_NORMAL 1
|
||||
|
||||
_unused1 : 1, // 1
|
||||
lone_worker : 1; // Lone Worker
|
||||
|
||||
// Byte 1
|
||||
uint8_t talkaround : 1, // Allow Talkaround
|
||||
rx_only : 1, // RX Only Enable
|
||||
repeater_slot : 2, // Repeater Slot: 1 or 2
|
||||
colorcode : 4; // Color Code: 0...15
|
||||
|
||||
// Byte 2
|
||||
uint8_t privacy_no : 4, // Privacy No. (+1): 1...16
|
||||
privacy : 2, // Privacy: None, Basic or Enhanced
|
||||
#define PRIV_NONE 0
|
||||
#define PRIV_BASIC 1
|
||||
#define PRIV_ENHANCED 2
|
||||
|
||||
private_call_conf : 1, // Private Call Confirmed
|
||||
data_call_conf : 1; // Data Call Confirmed
|
||||
|
||||
// Byte 3
|
||||
uint8_t rx_ref_frequency : 2, // RX Ref Frequency: Low, Medium or High
|
||||
#define REF_LOW 0
|
||||
#define REF_MEDIUM 1
|
||||
#define REF_HIGH 2
|
||||
|
||||
_unused2 : 1, // 0
|
||||
emergency_alarm_ack : 1, // Emergency Alarm Ack
|
||||
_unused3 : 2, // 0b10
|
||||
uncompressed_udp : 1, // Compressed UDP Data header (0) Enable, (1) Disable
|
||||
display_pttid_dis : 1; // Display PTT ID (inverted)
|
||||
|
||||
// Byte 4
|
||||
uint8_t tx_ref_frequency : 2, // RX Ref Frequency: Low, Medium or High
|
||||
_unused4 : 2, // 0b01
|
||||
vox : 1, // VOX Enable
|
||||
power : 1, // Power: Low, High
|
||||
#define POWER_HIGH 1
|
||||
#define POWER_LOW 0
|
||||
|
||||
admit_criteria : 2; // Admit Criteria: Always, Channel Free or Correct CTS/DCS
|
||||
#define ADMIT_ALWAYS 0
|
||||
#define ADMIT_CH_FREE 1
|
||||
#define ADMIT_TONE 2
|
||||
#define ADMIT_COLOR 3
|
||||
|
||||
// Byte 5
|
||||
uint8_t _unused5 : 4, // 0
|
||||
in_call_criteria : 2, // In Call Criteria: Always, Follow Admit Criteria or TX Interrupt
|
||||
#define INCALL_ALWAYS 0
|
||||
#define INCALL_ADMIT 1
|
||||
|
||||
_unused6 : 2; // 0b11
|
||||
|
||||
// Bytes 6-7
|
||||
uint16_t contact_name_index; // Contact Name: Contact1...
|
||||
|
||||
// Bytes 8-9
|
||||
uint8_t tot : 6, // TOT x 15sec: 0-Infinite, 1=15s... 37=555s
|
||||
_unused13 : 2; // 0
|
||||
uint8_t tot_rekey_delay; // TOT Rekey Delay: 0s...255s
|
||||
|
||||
// Bytes 10-11
|
||||
uint8_t emergency_system_index; // Emergency System: None, System1...32
|
||||
uint8_t scan_list_index; // Scan List: None, ScanList1...250
|
||||
|
||||
// Bytes 12-13
|
||||
uint8_t group_list_index; // Group List: None, GroupList1...250
|
||||
uint8_t _unused7; // 0
|
||||
|
||||
// Bytes 14-15
|
||||
uint8_t _unused8; // 0
|
||||
uint8_t _unused9; // 0xff
|
||||
|
||||
// Bytes 16-23
|
||||
uint32_t rx_frequency; // RX Frequency: 8 digits BCD
|
||||
uint32_t tx_frequency; // TX Frequency: 8 digits BCD
|
||||
|
||||
// Bytes 24-27
|
||||
uint16_t ctcss_dcs_receive; // CTCSS/DCS Dec: 4 digits BCD
|
||||
uint16_t ctcss_dcs_transmit; // CTCSS/DCS Enc: 4 digits BCD
|
||||
// Byte 24
|
||||
uint8_t channel_mode; // Mode: Analog or Digital
|
||||
#define MODE_ANALOG 0
|
||||
#define MODE_DIGITAL 1
|
||||
|
||||
// Bytes 28-29
|
||||
uint8_t rx_signaling_syst; // Rx Signaling System: Off, DTMF-1...4
|
||||
uint8_t tx_signaling_syst; // Tx Signaling System: Off, DTMF-1...4
|
||||
// Bytes 25-26
|
||||
uint8_t _unused25[2]; // 0
|
||||
|
||||
// Bytes 27-28
|
||||
uint8_t tot; // TOT x 15sec: 0-Infinite, 1=15s... 33=495s
|
||||
uint8_t tot_rekey_delay; // TOT Rekey Delay: 0s...255s
|
||||
|
||||
// Byte 29
|
||||
uint8_t admit_criteria; // Admit Criteria: Always, Channel Free or Color Code
|
||||
#define ADMIT_ALWAYS 0
|
||||
#define ADMIT_CH_FREE 1
|
||||
#define ADMIT_COLOR 2
|
||||
|
||||
// Bytes 30-31
|
||||
uint8_t _unused10; // 0xff
|
||||
uint8_t _unused11; // 0xff
|
||||
uint8_t _unused30; // 0x50
|
||||
uint8_t scan_list_index; // Scan List: None, ScanList1...250
|
||||
|
||||
// Bytes 32-35
|
||||
uint16_t ctcss_dcs_receive; // CTCSS/DCS Dec: 4 digits BCD or 0xffff
|
||||
uint16_t ctcss_dcs_transmit; // CTCSS/DCS Enc: 4 digits BCD
|
||||
|
||||
// Bytes 36-39
|
||||
uint8_t _unused36; // 0
|
||||
uint8_t tx_signaling_syst; // Tx Signaling System: Off, DTMF
|
||||
uint8_t _unused38; // 0
|
||||
uint8_t rx_signaling_syst; // Rx Signaling System: Off, DTMF
|
||||
|
||||
// Bytes 40-43
|
||||
uint8_t _unused40; // 0x16
|
||||
uint8_t privacy_group; // Privacy Group: 0=None, 1=53474c39
|
||||
#define PRIVGR_NONE 0
|
||||
#define PRIVGR_53474C39 1
|
||||
|
||||
uint8_t colorcode_tx; // Color Code: 0...15
|
||||
uint8_t group_list_index; // Group List: None, GroupList1...128
|
||||
|
||||
// Bytes 44-47
|
||||
uint8_t colorcode_rx; // Color Code: 0...15
|
||||
uint8_t emergency_system_index; // Emergency System: None, System1...32
|
||||
uint16_t contact_name_index; // Contact Name: Contact1...
|
||||
|
||||
// Byte 48
|
||||
uint8_t _unused48 : 6, // 0
|
||||
emergency_alarm_ack : 1, // Emergency Alarm Ack
|
||||
data_call_conf : 1; // Data Call Confirmed
|
||||
|
||||
// Byte 49
|
||||
uint8_t private_call_conf : 1, // Private Call Confirmed
|
||||
_unused49_1 : 3, // 0
|
||||
privacy : 1, // Privacy: Off or On
|
||||
_unused49_5 : 1, // 0
|
||||
repeater_slot2 : 1, // Repeater Slot: 0=slot1 or 1=slot2
|
||||
_unused49_7 : 1; // 0
|
||||
|
||||
// Byte 50
|
||||
uint8_t dcdm : 1, // Dual Capacity Direct Mode
|
||||
_unused50_1 : 4, // 0
|
||||
non_ste_frequency : 1, // Non STE = Frequency
|
||||
_unused50_6 : 2; // 0
|
||||
|
||||
// Byte 51
|
||||
uint8_t _unused51_0 : 1, // 0
|
||||
bandwidth : 1, // Bandwidth: 12.5 or 25 kHz
|
||||
#define BW_12_5_KHZ 0
|
||||
#define BW_25_KHZ 1
|
||||
|
||||
rx_only : 1, // RX Only Enable
|
||||
talkaround : 1, // Allow Talkaround
|
||||
_unused51_4 : 2, // 0
|
||||
vox : 1, // VOX Enable
|
||||
power : 1; // Power: Low, High
|
||||
#define POWER_HIGH 1
|
||||
#define POWER_LOW 0
|
||||
|
||||
// Bytes 52-55
|
||||
uint8_t _unused52[3]; // 0
|
||||
uint8_t squelch; // Squelch: 0...9
|
||||
|
||||
} channel_t;
|
||||
|
||||
//
|
||||
@ -293,16 +277,13 @@ typedef struct {
|
||||
} intro_text_t;
|
||||
|
||||
static const char *POWER_NAME[] = { "Low", "High" };
|
||||
static const char *SQUELCH_NAME[] = { "Tight", "Normal" };
|
||||
static const char *BANDWIDTH[] = { "12.5", "20", "25", "25" };
|
||||
static const char *BANDWIDTH[] = { "12.5", "25" };
|
||||
static const char *CONTACT_TYPE[] = {"Group", "Private", "All", "???" };
|
||||
static const char *ADMIT_NAME[] = { "-", "Free", "Tone", "Color" };
|
||||
static const char *INCALL_NAME[] = { "-", "Admit", "-", "Admit" };
|
||||
static const char *ADMIT_NAME[] = { "-", "Free", "Color", "???" };
|
||||
|
||||
#ifdef PRINT_RARE_PARAMS
|
||||
static const char *REF_FREQUENCY[] = { "Low", "Med", "High" };
|
||||
static const char *PRIVACY_NAME[] = { "-", "Basic", "Enhanced" };
|
||||
static const char *SIGNALING_SYSTEM[] = { "-", "DTMF-1", "DTMF-2", "DTMF-3", "DTMF-4" };
|
||||
static const char *PRIVACY_NAME[] = { "-", "On" };
|
||||
static const char *SIGNALING_SYSTEM[] = { "-", "DTMF" };
|
||||
#endif
|
||||
|
||||
//
|
||||
@ -595,25 +576,25 @@ static int is_valid_frequency(int mhz)
|
||||
// Set the parameters for a given memory channel.
|
||||
//
|
||||
static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_mhz,
|
||||
int power, int scanlist, int autoscan, int squelch, int tot, int rxonly,
|
||||
int admit, int colorcode, int timeslot, int incall, int grouplist, int contact,
|
||||
int power, int scanlist, int squelch, int tot, int rxonly,
|
||||
int admit, int colorcode, int timeslot, int grouplist, int contact,
|
||||
int rxtone, int txtone, int width)
|
||||
{
|
||||
channel_t *ch = GET_CHANNEL(i);
|
||||
|
||||
ch->channel_mode = mode;
|
||||
ch->bandwidth = width;
|
||||
ch->autoscan = autoscan;
|
||||
ch->squelch = squelch;
|
||||
ch->rx_only = rxonly;
|
||||
ch->repeater_slot = timeslot;
|
||||
ch->colorcode = colorcode;
|
||||
ch->repeater_slot2 = (timeslot == 2);
|
||||
ch->colorcode_tx = colorcode;
|
||||
ch->colorcode_rx = colorcode;
|
||||
ch->data_call_conf = 1; // Always ask for SMS acknowledge
|
||||
ch->power = power;
|
||||
ch->admit_criteria = admit;
|
||||
ch->in_call_criteria = incall;
|
||||
ch->contact_name_index = contact;
|
||||
ch->tot = tot;
|
||||
ch->tot_rekey_delay = 0;
|
||||
ch->scan_list_index = scanlist;
|
||||
ch->group_list_index = grouplist;
|
||||
ch->rx_frequency = mhz_to_bcd(rx_mhz);
|
||||
@ -632,85 +613,85 @@ static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_
|
||||
static void erase_channel(int i)
|
||||
{
|
||||
channel_t *ch = GET_CHANNEL(i);
|
||||
|
||||
// Byte 0
|
||||
ch->channel_mode = MODE_ANALOG;
|
||||
ch->bandwidth = BW_12_5_KHZ;
|
||||
ch->autoscan = 0;
|
||||
ch->squelch = SQ_NORMAL;
|
||||
ch->_unused1 = 1;
|
||||
ch->lone_worker = 0;
|
||||
|
||||
// Byte 1
|
||||
ch->talkaround = 0;
|
||||
ch->rx_only = 0;
|
||||
ch->repeater_slot = 1;
|
||||
ch->colorcode = 1;
|
||||
|
||||
// Byte 2
|
||||
ch->privacy_no = 0;
|
||||
ch->privacy = PRIV_NONE;
|
||||
ch->private_call_conf = 0;
|
||||
ch->data_call_conf = 0;
|
||||
|
||||
// Byte 3
|
||||
ch->rx_ref_frequency = REF_LOW;
|
||||
ch->_unused2 = 0;
|
||||
ch->emergency_alarm_ack = 0;
|
||||
ch->_unused3 = 2;
|
||||
ch->uncompressed_udp = 1;
|
||||
ch->display_pttid_dis = 1;
|
||||
|
||||
// Byte 4
|
||||
ch->tx_ref_frequency = REF_LOW;
|
||||
ch->_unused4 = 1;
|
||||
ch->vox = 0;
|
||||
ch->power = POWER_HIGH;
|
||||
ch->admit_criteria = ADMIT_ALWAYS;
|
||||
|
||||
// Byte 5
|
||||
ch->_unused5 = 0;
|
||||
ch->in_call_criteria = INCALL_ALWAYS;
|
||||
ch->_unused6 = 3;
|
||||
|
||||
// Bytes 6-7
|
||||
ch->contact_name_index = 0;
|
||||
|
||||
// Bytes 8-9
|
||||
ch->tot = 60/15;
|
||||
ch->_unused13 = 0;
|
||||
ch->tot_rekey_delay = 0;
|
||||
|
||||
// Bytes 10-11
|
||||
ch->emergency_system_index = 0;
|
||||
ch->scan_list_index = 0;
|
||||
|
||||
// Bytes 12-13
|
||||
ch->group_list_index = 0;
|
||||
ch->_unused7 = 0;
|
||||
|
||||
// Bytes 14-15
|
||||
ch->_unused8 = 0;
|
||||
ch->_unused9 = 0xff;
|
||||
// Bytes 0-15
|
||||
memset(ch->name, 0xff, 16);
|
||||
|
||||
// Bytes 16-23
|
||||
ch->rx_frequency = 0x40000000;
|
||||
ch->tx_frequency = 0x40000000;
|
||||
|
||||
// Bytes 24-27
|
||||
ch->ctcss_dcs_receive = 0xffff;
|
||||
ch->ctcss_dcs_transmit = 0xffff;
|
||||
// Byte 24
|
||||
ch->channel_mode = MODE_ANALOG;
|
||||
|
||||
// Bytes 28-29
|
||||
ch->rx_signaling_syst = 0;
|
||||
ch->tx_signaling_syst = 0;
|
||||
// Bytes 25-26
|
||||
ch->_unused25[0] = 0;
|
||||
ch->_unused25[1] = 0;
|
||||
|
||||
// Bytes 27-28
|
||||
ch->tot = 0;
|
||||
ch->tot_rekey_delay = 5;
|
||||
|
||||
// Byte 29
|
||||
ch->admit_criteria = ADMIT_ALWAYS;
|
||||
|
||||
// Bytes 30-31
|
||||
ch->_unused10 = 0xff;
|
||||
ch->_unused11 = 0xff;
|
||||
ch->_unused30 = 0x50;
|
||||
ch->scan_list_index = 0;
|
||||
|
||||
// Bytes 32-63
|
||||
memset(ch->name, 0xff, 16);
|
||||
// Bytes 32-35
|
||||
ch->ctcss_dcs_receive = 0xffff;
|
||||
ch->ctcss_dcs_transmit = 0xffff;
|
||||
|
||||
// Bytes 36-39
|
||||
ch->_unused36 = 0;
|
||||
ch->tx_signaling_syst = 0;
|
||||
ch->_unused38 = 0;
|
||||
ch->rx_signaling_syst = 0;
|
||||
|
||||
// Bytes 40-43
|
||||
ch->_unused40 = 0x16;
|
||||
ch->privacy_group = PRIVGR_NONE;
|
||||
ch->colorcode_tx = 1;
|
||||
ch->group_list_index = 0;
|
||||
|
||||
// Bytes 44-47
|
||||
ch->colorcode_rx = 1;
|
||||
ch->emergency_system_index = 0;
|
||||
ch->contact_name_index = 0;
|
||||
|
||||
// Byte 48
|
||||
ch->_unused48 = 0;
|
||||
ch->emergency_alarm_ack = 0;
|
||||
ch->data_call_conf = 0;
|
||||
|
||||
// Byte 49
|
||||
ch->private_call_conf = 0;
|
||||
ch->_unused49_1 = 0;
|
||||
ch->privacy = 0;
|
||||
ch->_unused49_5 = 0;
|
||||
ch->repeater_slot2 = 0;
|
||||
ch->_unused49_7 = 0;
|
||||
|
||||
// Byte 50
|
||||
ch->dcdm = 0;
|
||||
ch->_unused50_1 = 0;
|
||||
ch->non_ste_frequency = 0;
|
||||
ch->_unused50_6 = 0;
|
||||
|
||||
// Byte 51
|
||||
ch->_unused51_0 = 0;
|
||||
ch->bandwidth = BW_25_KHZ;
|
||||
ch->rx_only = 0;
|
||||
ch->talkaround = 0;
|
||||
ch->_unused51_4 = 0;
|
||||
ch->vox = 0;
|
||||
ch->power = POWER_HIGH;
|
||||
|
||||
// Bytes 52-55
|
||||
ch->_unused52[0] = 0;
|
||||
ch->_unused52[1] = 0;
|
||||
ch->_unused52[2] = 0;
|
||||
ch->squelch = 5;
|
||||
}
|
||||
|
||||
static void print_chanlist(FILE *out, uint16_t *unsorted, int nchan, int scanlist_flag)
|
||||
@ -809,7 +790,6 @@ static int have_channels(int mode)
|
||||
// TX Frequency
|
||||
// Power
|
||||
// Scan List
|
||||
// Autoscan
|
||||
// TOT
|
||||
// RX Only
|
||||
// Admit Criteria
|
||||
@ -830,8 +810,6 @@ static void print_chan_base(FILE *out, channel_t *ch, int cnum)
|
||||
else
|
||||
fprintf(out, "%-4d ", ch->scan_list_index);
|
||||
|
||||
fprintf(out, "%c ", "-+"[ch->autoscan]);
|
||||
|
||||
if (ch->tot == 0)
|
||||
fprintf(out, "- ");
|
||||
else
|
||||
@ -839,7 +817,7 @@ static void print_chan_base(FILE *out, channel_t *ch, int cnum)
|
||||
|
||||
fprintf(out, "%c ", "-+"[ch->rx_only]);
|
||||
|
||||
fprintf(out, "%-6s ", ADMIT_NAME[ch->admit_criteria]);
|
||||
fprintf(out, "%-6s ", ADMIT_NAME[ch->admit_criteria & 3]);
|
||||
}
|
||||
|
||||
#ifdef PRINT_RARE_PARAMS
|
||||
@ -854,9 +832,6 @@ static void print_chan_base(FILE *out, channel_t *ch, int cnum)
|
||||
static void print_chan_ext(FILE *out, channel_t *ch)
|
||||
{
|
||||
fprintf(out, "%-3d ", ch->tot_rekey_delay);
|
||||
fprintf(out, "%-5s ", REF_FREQUENCY[ch->rx_ref_frequency]);
|
||||
fprintf(out, "%-5s ", REF_FREQUENCY[ch->tx_ref_frequency]);
|
||||
fprintf(out, "%c ", "-+"[ch->lone_worker]);
|
||||
fprintf(out, "%c ", "-+"[ch->vox]);
|
||||
fprintf(out, "%c ", "-+"[ch->talkaround]);
|
||||
}
|
||||
@ -874,26 +849,27 @@ static void print_digital_channels(FILE *out, int verbose)
|
||||
fprintf(out, "# 4) Transmit frequency or +/- offset in MHz\n");
|
||||
fprintf(out, "# 5) Transmit power: High, Low\n");
|
||||
fprintf(out, "# 6) Scan list: - or index in Scanlist table\n");
|
||||
fprintf(out, "# 7) Autoscan flag: -, +\n");
|
||||
fprintf(out, "# 8) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
|
||||
fprintf(out, "# 9) Receive only: -, +\n");
|
||||
fprintf(out, "# 10) Admit criteria: -, Free, Color\n");
|
||||
fprintf(out, "# 11) Color code: 0, 1, 2, 3... 15\n");
|
||||
fprintf(out, "# 12) Time slot: 1 or 2\n");
|
||||
fprintf(out, "# 13) In call criteria: -, Admit, TXInt\n");
|
||||
fprintf(out, "# 14) Receive group list: - or index in Grouplist table\n");
|
||||
fprintf(out, "# 15) Contact for transmit: - or index in Contacts table\n");
|
||||
fprintf(out, "# 7) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
|
||||
fprintf(out, "# 8) Receive only: -, +\n");
|
||||
fprintf(out, "# 9) Admit criteria: -, Free, Color\n");
|
||||
fprintf(out, "# 10) Color code: 0, 1, 2, 3... 15\n");
|
||||
fprintf(out, "# 11) Time slot: 1 or 2\n");
|
||||
fprintf(out, "# 12) Receive group list: - or index in Grouplist table\n");
|
||||
fprintf(out, "# 13) Contact for transmit: - or index in Contacts table\n");
|
||||
fprintf(out, "#\n");
|
||||
}
|
||||
fprintf(out, "Digital Name Receive Transmit Power Scan AS TOT RO Admit Color Slot InCall RxGL TxContact");
|
||||
fprintf(out, "Digital Name Receive Transmit Power Scan TOT RO Admit Color Slot RxGL TxContact");
|
||||
#ifdef PRINT_RARE_PARAMS
|
||||
fprintf(out, " Dly RxRef TxRef LW VOX TA EmSys Privacy PN PCC EAA DCC CU");
|
||||
fprintf(out, " Dly VOX TA EmSys Privacy PN PCC EAA DCC");
|
||||
#endif
|
||||
fprintf(out, "\n");
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
channel_t *ch = GET_CHANNEL(i);
|
||||
|
||||
if (!VALID_CHANNEL(ch) || ch->channel_mode != MODE_DIGITAL) {
|
||||
if (!VALID_CHANNEL(ch)) {
|
||||
break;
|
||||
}
|
||||
if (ch->channel_mode != MODE_DIGITAL) {
|
||||
// Select digital channels
|
||||
continue;
|
||||
}
|
||||
@ -902,11 +878,9 @@ static void print_digital_channels(FILE *out, int verbose)
|
||||
// Print digital parameters of the channel:
|
||||
// Color Code
|
||||
// Repeater Slot
|
||||
// In Call Criteria
|
||||
// Group List
|
||||
// Contact Name
|
||||
fprintf(out, "%-5d %-3d ", ch->colorcode, ch->repeater_slot);
|
||||
fprintf(out, "%-6s ", INCALL_NAME[ch->in_call_criteria]);
|
||||
fprintf(out, "%-5d %-3d ", ch->colorcode_tx, ch->repeater_slot2 + 1);
|
||||
|
||||
if (ch->group_list_index == 0)
|
||||
fprintf(out, "- ");
|
||||
@ -924,7 +898,7 @@ static void print_digital_channels(FILE *out, int verbose)
|
||||
// Extended digital parameters of the channel:
|
||||
// Emergency System
|
||||
// Privacy
|
||||
// Privacy No. (+1)
|
||||
// Privacy Group
|
||||
// Private Call Confirmed
|
||||
// Emergency Alarm Ack
|
||||
// Data Call Confirmed
|
||||
@ -937,15 +911,14 @@ static void print_digital_channels(FILE *out, int verbose)
|
||||
|
||||
fprintf(out, "%-8s ", PRIVACY_NAME[ch->privacy]);
|
||||
|
||||
if (ch->privacy == PRIV_NONE)
|
||||
if (ch->privacy == 0)
|
||||
fprintf(out, "- ");
|
||||
else
|
||||
fprintf(out, "%-2d ", ch->privacy_no + 1);
|
||||
fprintf(out, "%-2d ", ch->privacy_group);
|
||||
|
||||
fprintf(out, "%c ", "-+"[ch->private_call_conf]);
|
||||
fprintf(out, "%c ", "-+"[ch->emergency_alarm_ack]);
|
||||
fprintf(out, "%c ", "-+"[ch->data_call_conf]);
|
||||
fprintf(out, "%c ", "+-"[ch->uncompressed_udp]);
|
||||
#endif
|
||||
// Print contact name as a comment.
|
||||
if (ch->contact_name_index > 0) {
|
||||
@ -971,25 +944,27 @@ static void print_analog_channels(FILE *out, int verbose)
|
||||
fprintf(out, "# 4) Transmit frequency or +/- offset in MHz\n");
|
||||
fprintf(out, "# 5) Transmit power: High, Low\n");
|
||||
fprintf(out, "# 6) Scan list: - or index\n");
|
||||
fprintf(out, "# 7) Autoscan flag: -, +\n");
|
||||
fprintf(out, "# 8) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
|
||||
fprintf(out, "# 9) Receive only: -, +\n");
|
||||
fprintf(out, "# 10) Admit criteria: -, Free, Tone\n");
|
||||
fprintf(out, "# 11) Squelch level: Normal, Tight\n");
|
||||
fprintf(out, "# 12) Guard tone for receive, or '-' to disable\n");
|
||||
fprintf(out, "# 13) Guard tone for transmit, or '-' to disable\n");
|
||||
fprintf(out, "# 14) Bandwidth in kHz: 12.5, 20, 25\n");
|
||||
fprintf(out, "# 7) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
|
||||
fprintf(out, "# 8) Receive only: -, +\n");
|
||||
fprintf(out, "# 9) Admit criteria: -, Free, Tone\n");
|
||||
fprintf(out, "# 10) Squelch level: Normal, Tight\n");
|
||||
fprintf(out, "# 11) Guard tone for receive, or '-' to disable\n");
|
||||
fprintf(out, "# 12) Guard tone for transmit, or '-' to disable\n");
|
||||
fprintf(out, "# 13) Bandwidth in kHz: 12.5, 20, 25\n");
|
||||
fprintf(out, "#\n");
|
||||
}
|
||||
fprintf(out, "Analog Name Receive Transmit Power Scan AS TOT RO Admit Squelch RxTone TxTone Width");
|
||||
fprintf(out, "Analog Name Receive Transmit Power Scan TOT RO Admit Squelch RxTone TxTone Width");
|
||||
#ifdef PRINT_RARE_PARAMS
|
||||
fprintf(out, " Dly RxRef TxRef LW VOX TA RxSign TxSign ID");
|
||||
fprintf(out, " Dly RxRef TxRef LW VOX TA RxSign TxSign");
|
||||
#endif
|
||||
fprintf(out, "\n");
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
channel_t *ch = GET_CHANNEL(i);
|
||||
|
||||
if (!VALID_CHANNEL(ch) || ch->channel_mode != MODE_ANALOG) {
|
||||
if (!VALID_CHANNEL(ch)) {
|
||||
break;
|
||||
}
|
||||
if (ch->channel_mode != MODE_ANALOG) {
|
||||
// Select analog channels
|
||||
continue;
|
||||
}
|
||||
@ -1000,7 +975,7 @@ static void print_analog_channels(FILE *out, int verbose)
|
||||
// CTCSS/DCS Dec
|
||||
// CTCSS/DCS Enc
|
||||
// Bandwidth
|
||||
fprintf(out, "%-7s ", SQUELCH_NAME[ch->squelch]);
|
||||
fprintf(out, "%-7d ", ch->squelch);
|
||||
print_tone(out, ch->ctcss_dcs_receive);
|
||||
fprintf(out, " ");
|
||||
print_tone(out, ch->ctcss_dcs_transmit);
|
||||
@ -1012,11 +987,8 @@ static void print_analog_channels(FILE *out, int verbose)
|
||||
// Extended analog parameters of the channel:
|
||||
// Rx Signaling System
|
||||
// Tx Signaling System
|
||||
// Display PTT ID (inverted)
|
||||
// Non-QT/DQT Turn-off Freq.
|
||||
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->rx_signaling_syst]);
|
||||
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->tx_signaling_syst]);
|
||||
fprintf(out, "%c ", "+-"[ch->display_pttid_dis]);
|
||||
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->rx_signaling_syst & 1]);
|
||||
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->tx_signaling_syst & 1]);
|
||||
#endif
|
||||
fprintf(out, "\n");
|
||||
}
|
||||
@ -1407,18 +1379,18 @@ static void rd5r_parse_parameter(radio_device_t *radio, char *param, char *value
|
||||
static int parse_digital_channel(radio_device_t *radio, int first_row, char *line)
|
||||
{
|
||||
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
|
||||
char power_str[256], scanlist_str[256], autoscan_str[256];
|
||||
char power_str[256], scanlist_str[256];
|
||||
char tot_str[256], rxonly_str[256], admit_str[256], colorcode_str[256];
|
||||
char slot_str[256], incall_str[256], grouplist_str[256], contact_str[256];
|
||||
int num, power, scanlist, autoscan, tot, rxonly, admit;
|
||||
int colorcode, timeslot, incall, grouplist, contact;
|
||||
char slot_str[256], grouplist_str[256], contact_str[256];
|
||||
int num, power, scanlist, tot, rxonly, admit;
|
||||
int colorcode, timeslot, grouplist, contact;
|
||||
double rx_mhz, tx_mhz;
|
||||
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s %s %s",
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s",
|
||||
num_str, name_str, rxfreq_str, offset_str,
|
||||
power_str, scanlist_str, autoscan_str,
|
||||
power_str, scanlist_str,
|
||||
tot_str, rxonly_str, admit_str, colorcode_str,
|
||||
slot_str, incall_str, grouplist_str, contact_str) != 15)
|
||||
slot_str, grouplist_str, contact_str) != 13)
|
||||
return 0;
|
||||
|
||||
num = atoi(num_str);
|
||||
@ -1460,15 +1432,6 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
}
|
||||
}
|
||||
|
||||
if (*autoscan_str == '-') {
|
||||
autoscan = 0;
|
||||
} else if (*autoscan_str == '+') {
|
||||
autoscan = 1;
|
||||
} else {
|
||||
fprintf(stderr, "Bad autoscan flag.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
tot = atoi(tot_str);
|
||||
if (tot > 555 || tot % 15 != 0) {
|
||||
fprintf(stderr, "Bad timeout timer.\n");
|
||||
@ -1508,15 +1471,6 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (*incall_str == '-' || strcasecmp("Always", incall_str) == 0) {
|
||||
incall = INCALL_ALWAYS;
|
||||
} else if (strcasecmp("Admit", incall_str) == 0) {
|
||||
incall = INCALL_ADMIT;
|
||||
} else {
|
||||
fprintf(stderr, "Bad incall criteria.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (*grouplist_str == '-') {
|
||||
grouplist = 0;
|
||||
} else {
|
||||
@ -1545,8 +1499,8 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
}
|
||||
|
||||
setup_channel(num-1, MODE_DIGITAL, name_str, rx_mhz, tx_mhz,
|
||||
power, scanlist, autoscan, SQ_NORMAL, tot, rxonly, admit,
|
||||
colorcode, timeslot, incall, grouplist, contact, 0xffff, 0xffff, BW_12_5_KHZ);
|
||||
power, scanlist, 5, tot, rxonly, admit,
|
||||
colorcode, timeslot, grouplist, contact, 0xffff, 0xffff, BW_12_5_KHZ);
|
||||
|
||||
radio->channel_count++;
|
||||
return 1;
|
||||
@ -1560,18 +1514,18 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
static int parse_analog_channel(radio_device_t *radio, int first_row, char *line)
|
||||
{
|
||||
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
|
||||
char power_str[256], scanlist_str[256], autoscan_str[256], squelch_str[256];
|
||||
char power_str[256], scanlist_str[256], squelch_str[256];
|
||||
char tot_str[256], rxonly_str[256], admit_str[256];
|
||||
char rxtone_str[256], txtone_str[256], width_str[256];
|
||||
int num, power, scanlist, autoscan, squelch, tot, rxonly, admit;
|
||||
int num, power, scanlist, squelch, tot, rxonly, admit;
|
||||
int rxtone, txtone, width;
|
||||
double rx_mhz, tx_mhz;
|
||||
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s %s",
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s",
|
||||
num_str, name_str, rxfreq_str, offset_str,
|
||||
power_str, scanlist_str, autoscan_str,
|
||||
power_str, scanlist_str,
|
||||
tot_str, rxonly_str, admit_str, squelch_str,
|
||||
rxtone_str, txtone_str, width_str) != 14)
|
||||
rxtone_str, txtone_str, width_str) != 13)
|
||||
return 0;
|
||||
|
||||
num = atoi(num_str);
|
||||
@ -1613,21 +1567,9 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
}
|
||||
}
|
||||
|
||||
if (*autoscan_str == '-') {
|
||||
autoscan = 0;
|
||||
} else if (*autoscan_str == '+') {
|
||||
autoscan = 1;
|
||||
} else {
|
||||
fprintf(stderr, "Bad autoscan flag.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (strcasecmp ("Normal", squelch_str) == 0) {
|
||||
squelch = SQ_NORMAL;
|
||||
} else if (strcasecmp ("Tight", squelch_str) == 0) {
|
||||
squelch = SQ_TIGHT;
|
||||
} else {
|
||||
fprintf (stderr, "Bad squelch level.\n");
|
||||
squelch = atoi(tot_str);
|
||||
if (squelch < 0 || squelch > 9) {
|
||||
fprintf(stderr, "Bad squelch level.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -1651,8 +1593,6 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
admit = ADMIT_ALWAYS;
|
||||
} else if (strcasecmp("Free", admit_str) == 0) {
|
||||
admit = ADMIT_CH_FREE;
|
||||
} else if (strcasecmp("Tone", admit_str) == 0) {
|
||||
admit = ADMIT_TONE;
|
||||
} else {
|
||||
fprintf(stderr, "Bad admit criteria.\n");
|
||||
return 0;
|
||||
@ -1671,8 +1611,6 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
|
||||
if (strcasecmp ("12.5", width_str) == 0) {
|
||||
width = BW_12_5_KHZ;
|
||||
} else if (strcasecmp ("20", width_str) == 0) {
|
||||
width = BW_20_KHZ;
|
||||
} else if (strcasecmp ("25", width_str) == 0) {
|
||||
width = BW_25_KHZ;
|
||||
} else {
|
||||
@ -1686,8 +1624,8 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
}
|
||||
|
||||
setup_channel(num-1, MODE_ANALOG, name_str, rx_mhz, tx_mhz,
|
||||
power, scanlist, autoscan, squelch, tot, rxonly, admit,
|
||||
1, 1, 0, 0, 0, rxtone, txtone, width);
|
||||
power, scanlist, squelch, tot, rxonly, admit,
|
||||
1, 1, 0, 0, rxtone, txtone, width);
|
||||
|
||||
radio->channel_count++;
|
||||
return 1;
|
||||
@ -2116,7 +2054,7 @@ static int rd5r_verify_config(radio_device_t *radio)
|
||||
channel_t *ch = GET_CHANNEL(i);
|
||||
|
||||
if (!VALID_CHANNEL(ch))
|
||||
continue;
|
||||
break;
|
||||
|
||||
nchannels++;
|
||||
if (ch->scan_list_index != 0) {
|
||||
|
Loading…
Reference in New Issue
Block a user