docs: describe deploying with krops in installation tutorial
This commit is contained in:
Jonas Nick
Erik Arvstedt
parent
eb6dff5478
commit
7c0b521785
115
docs/install.md
115
docs/install.md
@ -1,21 +1,15 @@
|
||||
Preliminary steps
|
||||
---
|
||||
Get a machine to deploy nix-bitcoin on (see [hardware.md](hardware.md)).
|
||||
# Tutorial: Install and configure NixOS for nix-bitcoin on a dedicated machine
|
||||
|
||||
# Tutorials
|
||||
|
||||
1. [Install and configure NixOS for nix-bitcoin on your own hardware](#tutorial-install-and-configure-nixos-for-nix-bitcoin-on-your-own-hardware)
|
||||
|
||||
----
|
||||
|
||||
Tutorial: install and configure NixOS for nix-bitcoin on your own hardware
|
||||
---
|
||||
This tutorial describes how to manage your Bitcoin node comfortably from your personal computer with the deployment tool [krops](https://github.com/krebs/krops).
|
||||
However, nix-bitcoin is agnostic to the deployment method and can be used with different or without such tools (see [examples](../examples/README.md)).
|
||||
|
||||
## 0. Preparation
|
||||
|
||||
1. Optional: Make sure you have the latest firmware for your system (BIOS, microcode updates).
|
||||
1. Find a machine to deploy nix-bitcoin on (see [hardware.md](hardware.md)).
|
||||
|
||||
2. Optional: Disable Simultaneous Multi-Threading (SMT) in the BIOS
|
||||
2. Optional: Make sure you have the latest firmware for your system (BIOS, microcode updates).
|
||||
|
||||
3. Optional: Disable Simultaneous Multi-Threading (SMT) in the BIOS
|
||||
|
||||
Researchers recommend disabling (SMT), also known as Hyper-Threading Technology in the Intel® world to significantly reduce the impact of speculative execution-based attacks (https://mdsattacks.com/).
|
||||
|
||||
@ -241,29 +235,77 @@ You can also build Nix from source by following the instructions at https://nixo
|
||||
cd ../../
|
||||
mkdir nix-bitcoin-node
|
||||
cd nix-bitcoin-node
|
||||
# TODO
|
||||
cp -r ../nix-bitcoin/examples/{configuration.nix,shell.nix,nix-bitcoin-release.nix,.gitignore} .
|
||||
cp -r ../nix-bitcoin/examples/{nix-bitcoin-release.nix,configuration.nix,shell.nix,krops,.gitignore} .
|
||||
```
|
||||
|
||||
## 4. Deploy with TODO
|
||||
1. TODO
|
||||
2. Edit `configuration.nix`
|
||||
## 4. Deploy with krops
|
||||
|
||||
1. Edit your ssh config
|
||||
|
||||
```
|
||||
nano ~/.ssh/config
|
||||
```
|
||||
|
||||
and add the node with an entry similar to the following (make sure to fix `Hostname` and `IdentityFile`):
|
||||
|
||||
```
|
||||
Host bitcoin-node
|
||||
# FIXME
|
||||
Hostname NODE_IP_ADDRESS_OR_HOST_NAME_HERE
|
||||
User root
|
||||
PubkeyAuthentication yes
|
||||
# FIXME
|
||||
IdentityFile ~/.ssh/id_...
|
||||
AddKeysToAgent yes
|
||||
```
|
||||
|
||||
2. Make sure you are in the deployment directory and edit `krops/deploy.nix`
|
||||
|
||||
```
|
||||
nano krops/deploy.nix
|
||||
```
|
||||
|
||||
Locate the `FIXME` and set the target to the name of the ssh config entry created earlier, i.e. `bitcoin-node`.
|
||||
|
||||
Note that any file imported by your `configuration.nix` must be copied to the target machine by krops.
|
||||
For example, if there is an import of `networking.nix` you must add it to `extraSources` in `krops/deploy.nix` like this:
|
||||
```
|
||||
extraSources = {
|
||||
"hardware-configuration.nix".file = toString ../hardware-configuration.nix;
|
||||
"networking.nix".file = toString ../networking.nix;
|
||||
};
|
||||
```
|
||||
|
||||
3. Optional: Disallow substitutes
|
||||
|
||||
If you prefer to build the system from source instead of copying binaries from the Nix cache, add the following line to `configuration.nix`:
|
||||
```
|
||||
nix.extraOptions = "substitute = false";
|
||||
```
|
||||
|
||||
If the build process fails for some reason when deploying with `krops-deploy` (see later step), it may be difficult to find the cause due to the missing output.
|
||||
To see the build output, SSH into the target machine and run
|
||||
```
|
||||
nixos-rebuild -I /var/src switch
|
||||
```
|
||||
|
||||
4. Copy `hardware-configuration.nix` from your node to the deployment directory.
|
||||
|
||||
```
|
||||
scp root@bitcoin-node:/etc/nixos/hardware-configuration.nix .
|
||||
```
|
||||
|
||||
5. Adjust configuration by opening the `configuration.nix` file and enable/disable the modules you want by editing this file.
|
||||
|
||||
```
|
||||
nano configuration.nix
|
||||
```
|
||||
|
||||
Uncomment `./hardware-configuration.nix` line by removing #.
|
||||
Pay attention to lines that are preceded by `FIXME` comments. In particular:
|
||||
1. Make sure to set your SSH pubkey. Otherwise, you loose remote access because the config does not enable `permitRootLogin` (unless you add that manually).
|
||||
2. Uncomment the line `./hardware-configuration.nix` by removing `#`.
|
||||
|
||||
3. Create `hardware-configuration.nix`.
|
||||
|
||||
```
|
||||
nano hardware-configuration.nix
|
||||
```
|
||||
|
||||
Copy contents of your NixOS machine's `/etc/nixos/hardware-configuration.nix` to this file.
|
||||
|
||||
4. Enter environment
|
||||
6. Enter the deployment environment
|
||||
|
||||
```
|
||||
nix-shell
|
||||
@ -271,10 +313,21 @@ You can also build Nix from source by following the instructions at https://nixo
|
||||
|
||||
NOTE that a new directory `secrets/` appeared which contains the secrets for your node.
|
||||
|
||||
5. TODO
|
||||
6. Adjust configuration by opening the `configuration.nix` file and enable/disable the modules you want by editing this file. Pay particular attention to lines that are preceded by `FIXME` comments. Make sure to set your SSH pubkey. Otherwise, you loose remote access because the config does not enable `permitRootLogin` (unless you add that manually).
|
||||
7. Deploy with krops in nix-shell
|
||||
|
||||
7. TODO
|
||||
```
|
||||
krops-deploy
|
||||
```
|
||||
|
||||
This will now create a nix-bitcoin node on the target machine.
|
||||
|
||||
8. You can now access `bitcoin-node` via ssh
|
||||
|
||||
```
|
||||
ssh operator@bitcoin-node
|
||||
```
|
||||
|
||||
Note that you're able to log in as the unprivileged `operator` user because nix-bitcoin automatically authorizes the ssh key added to `root`.
|
||||
|
||||
For security reasons, all normal system management tasks can and should be performed with the `operator` user. Logging in as `root` should be done as rarely as possible.
|
||||
|
||||
|
||||
@ -174,7 +174,9 @@ Connect to nix-bitcoin node through the SSH onion service
|
||||
ssh -i ~/.ssh/id_ed25519 -L <random port of your choosing>:localhost:22 root@<SSH onion address>
|
||||
```
|
||||
|
||||
5. Edit your network to change the node's address to `localhost` and the ssh port to `[random port of your choosing]`
|
||||
5. Edit your deployment tool's configuration and change the node's address to `localhost` and the ssh port to `<random port of your choosing>`.
|
||||
If you use krops as described in the [installation tutorial](./install.md), set `target = "localhost:<random port of your choosing>";` in `krops/deploy.nix`.
|
||||
|
||||
|
||||
6. After deploying the new configuration, it will connect through the SSH tunnel you established in step iv. This also allows you to do more complex SSH setups that some deployment tools don't support. An example would be authenticating with [Trezor's SSH agent](https://github.com/romanz/trezor-agent), which provides extra security.
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user