377 lines
9.8 KiB
Markdown
377 lines
9.8 KiB
Markdown
Preliminary steps
|
|
---
|
|
Get a machine to deploy nix-bitcoin on.
|
|
This could be a VirtualBox, a machine that is already running [NixOS](https://nixos.org/nixos/manual/index.html) or a cloud provider.
|
|
Have a look at the options in the [NixOps manual](https://nixos.org/nixops/manual/).
|
|
|
|
# Tutorials
|
|
1. [Install and configure NixOS for nix-bitcoin on VirtualBox](#tutorial-install-and-configure-nixos-for-nix-bitcoin-on-virtualbox)
|
|
2. [Install and configure NixOS for nix-bitcoin on your own hardware](#tutorial-install-and-configure-nixos-for-nix-bitcoin-on-your-own-hardware)
|
|
|
|
Tutorial: install and configure NixOS for nix-bitcoin on VirtualBox
|
|
---
|
|
## 1. VirtualBox installation
|
|
The following steps are meant to be run on the machine you deploy from, not the machine you deploy to.
|
|
|
|
1. Add virtualbox.list to /etc/apt/sources.list.d (Debian 9 stretch)
|
|
|
|
```
|
|
echo "deb http://download.virtualbox.org/virtualbox/debian stretch contrib" | sudo tee /etc/apt/sources.list.d/virtualbox.list
|
|
```
|
|
|
|
2. Add Oracle VirtualBox public key
|
|
|
|
```
|
|
wget https://www.virtualbox.org/download/oracle_vbox_2016.asc
|
|
gpg2 oracle_vbox_2016.asc
|
|
```
|
|
|
|
Proceed _only_ if fingerprint reads B9F8 D658 297A F3EF C18D 5CDF A2F6 83C5 2980 AECF
|
|
|
|
```
|
|
sudo apt-key add oracle_vbox_2016.asc
|
|
```
|
|
|
|
3. Install virtualbox-5.2
|
|
|
|
```
|
|
sudo apt-get update
|
|
sudo apt-get install virtualbox-5.2
|
|
```
|
|
|
|
3. Create Host Adapter in VirtualBox
|
|
|
|
```
|
|
vboxmanage hostonlyif create
|
|
```
|
|
|
|
## 2. Nix installation
|
|
The following steps are meant to be run on the machine you deploy from, not the machine you deploy to.
|
|
You can also build Nix from source by following the instructions at https://nixos.org/nix/manual/#ch-installing-source.
|
|
|
|
1. Install Dependencies (Debian 9 stretch)
|
|
|
|
```
|
|
sudo apt-get install curl git gnupg2 dirmngr
|
|
```
|
|
|
|
2. Install latest Nix in "multi-user mode" with GPG Verification
|
|
|
|
```
|
|
curl -o install-nix https://nixos.org/nix/install
|
|
curl -o install-nix.sig https://nixos.org/nix/install.sig
|
|
gpg2 --recv-keys B541D55301270E0BCF15CA5D8170B4726D7198DE
|
|
gpg2 --verify ./install-nix.sig
|
|
sh ./install-nix --daemon
|
|
```
|
|
|
|
Then follow the instructions. Open a new terminal window when you're done.
|
|
|
|
If you get an error similar to
|
|
```
|
|
error: cloning builder process: Operation not permitted
|
|
error: unable to start build process
|
|
/tmp/nix-binary-tarball-unpack.hqawN4uSPr/unpack/nix-2.2.1-x86_64-linux/install: unable to install Nix into your default profile
|
|
```
|
|
you're likely not installing as multi-user because you forgot to pass the `--daemon` flag to the install script.
|
|
|
|
3. Optional: Disallow substitutes
|
|
|
|
You can put `substitute = false` to your `nix.conf` usually found in `/etc/nix/` to build the packages from source.
|
|
This eliminates an attack vector where nix's build server or binary cache is compromised.
|
|
|
|
|
|
## 3. Nixops deployment
|
|
|
|
1. Clone this project
|
|
|
|
```
|
|
cd
|
|
git clone https://github.com/fort-nix/nix-bitcoin
|
|
cd ~/nix-bitcoin
|
|
```
|
|
|
|
2. Setup environment
|
|
|
|
```
|
|
nix-shell
|
|
```
|
|
|
|
This will set up your nix-bitcoin environment and might take a while without giving an output.
|
|
|
|
3. Create nixops deployment in nix-shell.
|
|
|
|
```
|
|
nixops create network/network.nix network/network-vbox.nix -d bitcoin-node
|
|
```
|
|
|
|
4. Adjust configuration by opening `configuration.nix` and removing FIXMEs. Enable/disable the modules you want in `configuration.nix`.
|
|
|
|
5. Deploy Nixops in nix-shell
|
|
|
|
```
|
|
nixops deploy -d bitcoin-node
|
|
```
|
|
|
|
This will now create a nix-bitcoin node on the target machine.
|
|
|
|
6. Nixops automatically creates an ssh key for use with `nixops ssh`. Access `bitcoin-node` through ssh in nix-shell with
|
|
|
|
```
|
|
nixops ssh operator@bitcoin-node
|
|
```
|
|
|
|
See [usage.md](usage.md) for usage instructions, such as how to update.
|
|
|
|
Tutorial: install and configure NixOS for nix-bitcoin on your own hardware
|
|
---
|
|
## 1. NixOS installation
|
|
|
|
This is borrowed from the [NixOS manual](https://nixos.org/nixos/manual/index.html#ch-installation). Look there for more information.
|
|
|
|
1. Obtain latest NixOS. For example:
|
|
|
|
```
|
|
wget https://releases.nixos.org/nixos/19.03/nixos-19.03.172538.7bb74e65365/nixos-minimal-19.03.172538.7bb74e65365-x86_64-linux.iso
|
|
```
|
|
Alternatively you can build NixOS from source by following the instructions at https://nixos.org/nixos/manual/index.html#sec-building-cd.
|
|
|
|
2. Write NixOS iso to install media (USB/CD). For example:
|
|
|
|
```
|
|
dd if=nixos-minimal-19.03.172538.7bb74e65365-x86_64-linux.iso of=/dev/sdX
|
|
```
|
|
|
|
Replace /dev/sdX with the correct device name. You can find this using `sudo fdisk -l`
|
|
|
|
3. Boot the system
|
|
|
|
You will have to find out if your hardware uses UEFI or Legacy Boot for the next step.
|
|
|
|
4. Option 1: Partition and format for UEFI
|
|
|
|
```
|
|
parted /dev/sda -- mklabel gpt
|
|
parted /dev/sda -- mkpart primary 512MiB -8GiB
|
|
parted /dev/sda -- mkpart primary linux-swap -8GiB 100%
|
|
parted /dev/sda -- mkpart ESP fat32 1MiB 512MiB
|
|
parted /dev/sda -- set 3 boot on
|
|
mkfs.ext4 -L nixos /dev/sda1
|
|
mkswap -L swap /dev/sda2
|
|
mkfs.fat -F 32 -n boot /dev/sda3
|
|
mount /dev/disk/by-label/nixos /mnt
|
|
mkdir -p /mnt/boot
|
|
mount /dev/disk/by-label/boot /mnt/boot
|
|
swapon /dev/sda2
|
|
```
|
|
|
|
4. Option 2: Partition and format for Legacy Boot (MBR)
|
|
|
|
```
|
|
parted /dev/sda -- mklabel msdos
|
|
parted /dev/sda -- mkpart primary 1MiB -8GiB
|
|
parted /dev/sda -- mkpart primary linux-swap -8GiB 100%
|
|
mkfs.ext4 -L nixos /dev/sda1
|
|
mkswap -L swap /dev/sda2
|
|
mount /dev/disk/by-label/nixos /mnt
|
|
swapon /dev/sda2
|
|
```
|
|
|
|
4. Option 3: Set up encrypted partitions:
|
|
|
|
Follow the guide at https://gist.github.com/martijnvermaat/76f2e24d0239470dd71050358b4d5134.
|
|
|
|
5. Generate NixOS config
|
|
|
|
```
|
|
nixos-generate-config --root /mnt
|
|
nano /mnt/etc/nixos/configuration.nix
|
|
```
|
|
|
|
Option 1: Edit NixOS configuration for UEFI
|
|
|
|
```
|
|
{ config, pkgs, ... }: {
|
|
imports = [
|
|
# Include the results of the hardware scan.
|
|
./hardware-configuration.nix
|
|
];
|
|
|
|
boot.loader.systemd-boot.enable = true;
|
|
|
|
# Note: setting fileSystems is generally not
|
|
# necessary, since nixos-generate-config figures them out
|
|
# automatically in hardware-configuration.nix.
|
|
#fileSystems."/".device = "/dev/disk/by-label/nixos";
|
|
|
|
# Enable the OpenSSH server.
|
|
services.openssh = {
|
|
enable = true;
|
|
permitRootLogin = "yes";
|
|
};
|
|
}
|
|
```
|
|
|
|
Option 2: Edit NixOS configuration for Legacy Boot (MBR)
|
|
|
|
```
|
|
{ config, pkgs, ... }: {
|
|
imports = [
|
|
# Include the results of the hardware scan.
|
|
./hardware-configuration.nix
|
|
];
|
|
|
|
boot.loader.grub.device = "/dev/sda";
|
|
|
|
# Note: setting fileSystems is generally not
|
|
# necessary, since nixos-generate-config figures them out
|
|
# automatically in hardware-configuration.nix.
|
|
#fileSystems."/".device = "/dev/disk/by-label/nixos";
|
|
|
|
# Enable the OpenSSH server.
|
|
services.openssh = {
|
|
enable = true;
|
|
permitRootLogin = "yes";
|
|
};
|
|
}
|
|
```
|
|
|
|
6. Do the installation
|
|
|
|
```
|
|
nixos-install
|
|
```
|
|
Set root password
|
|
```
|
|
setting root password...
|
|
Enter new UNIX password:
|
|
Retype new UNIX password:
|
|
```
|
|
|
|
7. If everything went well
|
|
|
|
```
|
|
reboot
|
|
```
|
|
|
|
## 2. nix-bitcoin installation
|
|
|
|
On the machine you are deploying from:
|
|
You can also build Nix from source by following the instructions at https://nixos.org/nix/manual/#ch-installing-source.
|
|
|
|
1. Install Dependencies (Debian 9 stretch)
|
|
|
|
```
|
|
sudo apt-get install curl git gnupg2 dirmngr
|
|
```
|
|
|
|
2. Install Latest Nix with GPG Verification
|
|
|
|
```
|
|
curl -o install-nix https://nixos.org/nix/install
|
|
curl -o install-nix.sig https://nixos.org/nix/install.sig
|
|
gpg2 --recv-keys B541D55301270E0BCF15CA5D8170B4726D7198DE
|
|
gpg2 --verify ./install-nix.sig
|
|
sh ./install-nix --daemon
|
|
. /home/user/.nix-profile/etc/profile.d/nix.sh
|
|
```
|
|
|
|
Then follow the instructions. Open a new terminal window when you're done.
|
|
|
|
If you get an error similar to
|
|
```
|
|
error: cloning builder process: Operation not permitted
|
|
error: unable to start build process
|
|
/tmp/nix-binary-tarball-unpack.hqawN4uSPr/unpack/nix-2.2.1-x86_64-linux/install: unable to install Nix into your default profile
|
|
```
|
|
you're likely not installing as multi-user because you forgot to pass the `--daemon` flag to the install script.
|
|
|
|
3. Optional: Disallow substitutes
|
|
|
|
You can put `substitute = false` to your `nix.conf` usually found in `/etc/nix/` to build the packages from source.
|
|
This eliminates an attack vector where nix's build server or binary cache is compromised.
|
|
|
|
4. Clone this project
|
|
|
|
```
|
|
cd
|
|
git clone https://github.com/fort-nix/nix-bitcoin
|
|
cd ~/nix-bitcoin
|
|
```
|
|
|
|
5. Create network file
|
|
|
|
```
|
|
nano network/network-nixos.nix
|
|
```
|
|
|
|
```
|
|
{
|
|
bitcoin-node =
|
|
{ config, pkgs, ... }:
|
|
{ deployment.targetHost = "1.2.3.4";
|
|
};
|
|
}
|
|
```
|
|
|
|
Replace 1.2.3.4 with NixOS machine's IP address.
|
|
|
|
6. Edit `configuration.nix`
|
|
|
|
```
|
|
nano configuration.nix
|
|
```
|
|
|
|
Uncomment `./hardware-configuration.nix` line by removing #.
|
|
|
|
7. Create `hardware-configuration.nix`
|
|
|
|
```
|
|
nano hardware-configuration.nix
|
|
```
|
|
Copy contents of NixOS machine's `/etc/nixos/hardware-configuration.nix` to file.
|
|
|
|
8. Add boot option to `hardware-configuration.nix`
|
|
|
|
Option 1: Enable systemd boot for UEFI
|
|
```
|
|
boot.loader.grub.device = "/dev/sda";
|
|
```
|
|
Option 2: Set grub device for Legacy Boot (MBR)
|
|
```
|
|
```
|
|
boot.loader.grub.device = "/dev/sda";
|
|
```
|
|
|
|
9. Setup environment
|
|
|
|
```
|
|
nix-shell
|
|
```
|
|
|
|
This will set up your nix-bitcoin environment and might take a while without giving an output.
|
|
|
|
10. Create nixops deployment in nix-shell.
|
|
|
|
```
|
|
nixops create network/network.nix network/network-nixos.nix -d bitcoin-node
|
|
```
|
|
|
|
11. Adjust configuration by opening `configuration.nix` and removing FIXMEs. Enable/disable the modules you want in `configuration.nix`.
|
|
|
|
12. Deploy Nixops in nix-shell
|
|
|
|
```
|
|
nixops deploy -d bitcoin-node
|
|
```
|
|
|
|
This will now create a nix-bitcoin node on the target machine.
|
|
|
|
13. Nixops automatically creates an ssh key for use with `nixops ssh`. Access `bitcoin-node` through ssh in nix-shell with
|
|
|
|
```
|
|
nixops ssh operator@bitcoin-node
|
|
```
|
|
|
|
See [usage.md](usage.md) for usage instructions, such as how to update.
|